| Content | FEATURES
- Series II, 2.4GHz digital transmission
- 128-bit encryption
- Up to 100 metres range*
- OLED display (on receiver)
- One button pairing
- Three level gain control
- AA battery or USB powered
- Includes broadcast lavalier microphone
- Two year extended warranty when you register your microphone
| FEATURES
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
| Features
- Wireless portability for the freedom to go wherever the job requires
- WL183 omnidirectional lav mic with TA4F connector features an omnidirectional polar pattern, ensuring that the sound remains consistent, even when the talent's head moves away from the mic
- Shure proprietary Audio Reference Companding for high-quality audio without “pumping” artifacts
- Automatic frequency selection locates an open frequency at the touch of a button
- Automatic transmitter setup instantly syncs the transmitter to the receiver's frequency
- Two diversity antennas for consistent reception of signal transmission at a range up to 330’
- 24 MHz bandwidth with 960 frequencies available for a clean transmission at your location
- Up to 12 compatible wireless mics may be used on set at once
- Transmitter’s input-level control adjustable for lav mic sensitivity
- Receiver’s output-level control adjustable for camera/mixer
- Transmitter can be locked to prevent accidental changes during performances
- Transmitter and receiver each run on 2 AA batteries for up to 11 hours of shooting time
- Receiver's output cables include the TA3F-to-3.5mm dual-mono audio cable and the TA3F-to-XLR-M audio cable
- All FP components are compatible with SLX wireless systems
- For man-on-the-street interviews or if you need to pass the mic between several people, you can add the FP2 handheld transmitter/microphone to your system
- Also available is the FP3 plug-on transmitter, which allows you to turn any dynamic mic into a wireless mic
| FEATURES
- Studio recording quality
- Condenser microphone
- Super-cardioid polar pattern
- 9V battery power
- Integrated Rycote® Lyre® shock mounting
- Two step High Pass Filter (Flat/80Hz)
- Three step PAD (0, -10, -20dB)
- Rugged reinforced ABS construction
- Windshield included
- 3.5mm mini-jack output
- Integrated cold-shoe mount (3/8” thread)
- 10 year extended warranty when you register your microphone
| Tascam DR-10SG Specs
| Recording Media |
microSD card (64 MB to 2 GB), microSDHC card (4 GB to 32 GB) |
| Recording Format |
16/24-bit @ 44.1/48 kHz |
| Mic |
Polarity: Supercardioid
Gain: 0 to +50 dB (1 dB step) |
| Analog Outputs |
Camera Out/Phones: 1/8" (3.5 mm) stereo mini-jack (dual-mono signal) |
| USB |
micro-B
Format: USB 2.0 High-Speed mass-storage class |
| Power |
1 x AAA battery (alkaline, rechargeable NiMH or disposable lithium)
USB bus power |
| Power Consumption |
0.75 W (maximum) |
| Battery Operating Time |
48 kHz/24-bit, Limiter/ Dual Rec: Off, File type: Mono
Lithium (Energizer Ultimate Lithium): 15:00 hours
NiMH Battery (eneloop): 7:30 hours
Alkaline (Evolta): 8:30 hours |
| Dimensions (W x H x D) |
2.1 x 6.6 x 2.8" (53 x 168 x 70.3 mm) |
| Weight |
3.9 oz (110 g) including batteries, 3.5 oz (98 g) without batteries |
Packaging Info
| Package Weight |
0.9 lb |
| Box Dimensions (LxWxH) |
9.449 x 5.276 x 3.071" |
| Digital Audio Radio Link for Videographers
- 2.4 GHz band
- 128-Bit encryption signal
- One button pairing
- System dynamic range: 112dB
- Frequency range: 35 - 22,000 Hz
- Conversion: 24 bit / 44.1 khz
- Latency: < 4 ms
- Range: Up to 100 m (line of sight)
- Power supply via microUSB connector or 2x AA batteries
- Firmware update via microUSB connector possible
- Manufactured in Australia
Features TX-XLR transmitter:
- Operating button
- Channel display
- 3-Way switch for level raising (0 dB/+10 dB/+20 dB)
- Channel link button
- Mute lock function
- 3.5 mm Jack (dual-mono) with external thread
- Provides 48 V phantom power on demand
- Dimensions: 120 x 45 x 45 mm
- Weight: 222 g (incl. batteries and cable)
Features RX-CAM receiver:
- Operating button
- Channel selection button
- Mute button
- OLED display for channel display, level, state and charge level (including the transmitter)
- 3-Way switch for pre-attenuation (0 dB / -10dB / -20 dB)
- Channel link button
- 3.5 mm jack (dual-mono) with external thread
- Hot shoe adapter with embedded 3/8" thread for tripod mounting
- Incl. TRS spiral cable (3.5mm jack, 17-40 cm) for connecting to a DSLR
- With nut cap for secure connection to the output jack of the receiver
- Dimensions: 111 x 65 x 52 mm
- Weight: 190 g incl. batteries
- Matching Sony NP-F970 battery (not supplied)
|
Reviews
There are no reviews yet.