| Content | Digital Audio Radio Link for Videographers
- 2.4 GHz band
- 128-Bit encryption signal
- One button pairing
- System dynamic range: 112dB
- Frequency range: 35 - 22,000 Hz
- Conversion: 24 bit / 44.1 khz
- Latency: < 4 ms
- Range: Up to 100 m (line of sight)
- Power supply via microUSB connector or 2x AA batteries
- Firmware update via microUSB connector possible
- Manufactured in Australia
Features TX-XLR transmitter:
- Operating button
- Channel display
- 3-Way switch for level raising (0 dB/+10 dB/+20 dB)
- Channel link button
- Mute lock function
- 3.5 mm Jack (dual-mono) with external thread
- Provides 48 V phantom power on demand
- Dimensions: 120 x 45 x 45 mm
- Weight: 222 g (incl. batteries and cable)
Features RX-CAM receiver:
- Operating button
- Channel selection button
- Mute button
- OLED display for channel display, level, state and charge level (including the transmitter)
- 3-Way switch for pre-attenuation (0 dB / -10dB / -20 dB)
- Channel link button
- 3.5 mm jack (dual-mono) with external thread
- Hot shoe adapter with embedded 3/8" thread for tripod mounting
- Incl. TRS spiral cable (3.5mm jack, 17-40 cm) for connecting to a DSLR
- With nut cap for secure connection to the output jack of the receiver
- Dimensions: 111 x 65 x 52 mm
- Weight: 190 g incl. batteries
- Matching Sony NP-F970 battery (not supplied)
| Spec description
| Recording media |
microSD card (64MB to 2GB),
microSDHC card (4GB to 32GB) |
| Media discharging |
Push-Push type (Guard cover mounted) |
| Recording format |
|
| V1.00 |
|
| WAV |
44.1k / 48k Hz, 16 / 24-bit mono/poly WAV (BWF format) |
| V2.00 |
|
| WAV |
44.1k / 48k Hz, 16 / 24-bit mono/poly (BWF format) |
| MP3 |
44.1k / 48k Hz, 24-bit mono/poly |
| Recording |
128k / 192k bps |
| Playback |
32k to 320k bps |
| Analog audio Inputs |
|
| Connector |
XLR-3-31 × 1 |
| Input Impedance |
10kΩ or more |
| MIC input gain |
LOW / MID / HIGH |
| PHONES |
|
| Connector |
1/8" (3.5mm) Stereo Mini jack (DUAL MONO) × 1 |
| USB |
|
| Connector |
USB Micro-B type 4pin × 1 |
| Maximum Output |
USB2.0 HIGH SPEED mass storage class |
| Power |
1 AAA batteries (Alkaline or NiMH),
USB bus power |
| Power consumption |
|
| Battery operation time |
|
| Alkaline batteries (EVOLTA) |
Aprrox. 10 hours |
| Battery (RTC) |
Lithium × 1(built in with soldering) |
| Dimensions |
2.1" × 3.7" × 1.1" / 52 × 94.4 × 28 mm |
| Weight |
2.4 oz. / 68.3 g (including batteries), 1.99 oz. / 56.3 g (excluding batteries) |
| Accessories |
USB cable, Owner's Manual (including warranty) |
| FEATURES
- Studio recording quality
- Condenser microphone
- Super-cardioid polar pattern
- 9V battery power
- Integrated Rycote® Lyre® shock mounting
- Two step High Pass Filter (Flat/80Hz)
- Three step PAD (0, -10, -20dB)
- Rugged reinforced ABS construction
- Windshield included
- 3.5mm mini-jack output
- Integrated cold-shoe mount (3/8” thread)
- 10 year extended warranty when you register your microphone
| FEATURES
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
| FP5 Portable Wireless Receiver
Patented audio reference companding for crystal-clear audio
Automatic frequency selection to locate an open frequency at the touch of a button
Automatic transmitter setup to instantly sync the transmitter to the receiver frequency
Power LED with low battery indicator
RF LED to indicate transmitter sync when illuminated
Support for up to 20 compatible systems simultaneously
Receiver output level control to manage output to camera/mixer
TA3F cable output to either XLR or 1/8" connectors (included)
Diversity antennas for consistent reception of signal transmission
Camera shoe mount (included)
FP2 Handheld Transmitter
Automatic transmitter Setup to instantly sync the transmitter to the receiver frequency
LED indicator for control lockout, IR RF sync, low battery indicator
Includes VP68 omnidirectional capsule and is compatible with all other Shure capsules
| FEATURES
- Series II, 2.4GHz digital transmission
- 128-bit encryption
- Up to 100 metres range*
- OLED display (on receiver)
- One button pairing
- Three level gain control
- AA battery or USB powered
- Includes broadcast lavalier microphone
- Two year extended warranty when you register your microphone
|
Reviews
There are no reviews yet.